Answering 24/7Marin · San Francisco · North Bay · East Bay · Peninsula
Licensed general contractor · CSLB #1071905
MM Bay Construction & Restoration
  1. Home
  2. Services
  3. Mold Remediation
Mold Remediation · 24/7

Mold remediation and removal in Marin and the Bay Area

MM Bay Construction & Restoration removes mold, fixes the moisture that caused it and rebuilds the affected area for homes and businesses across Marin County and the Bay Area. We answer 24/7, work under containment following industry standards, and coordinate independent testing when you want proof the job is complete.

  • Answered 24/7
  • Licensed contractor · CSLB #1071905
  • We bill your insurance
  • Dry-out to rebuild, one company

Request service

Leave your number and we’ll call you right back. Water coming in now? Call (415) 878-3410.

We use your details only to reply about your property. No spam, no sharing.

  • 24/7, every dayPhones answered, crews sent
  • Licensed & bondedCA General Building, CSLB #1071905
  • Insurance billed directlyWe work with your adjuster
  • We do the rebuild tooHomes, businesses, multifamily

Mold is a moisture problem first. Spores are present in almost every building, and they only grow into colonies where something stays damp: a slow leak inside a wall, a bathroom without enough ventilation, a crawl space over wet soil, a cold wall in a foggy neighborhood. Cleaning the growth without fixing the water is why mold comes back.

MM Bay approaches every mold job the way the industry standard for mold remediation, IICRC S520, describes. We find and measure the moisture, set up containment so spores do not spread to clean parts of the building, remove the affected materials, clean and dry what stays, and fix the source. Then, as a licensed general building contractor, we rebuild the walls, floors or ceilings we removed. If you want independent verification, we coordinate clearance testing with an outside assessor before the containment comes down. The work is explained calmly and in plain language, and we never promise more than the readings and results show.

Call us when you see

  • Visible spots on walls, ceilings, window frames or closet backs
  • A musty smell in a room, cabinet or crawl space
  • A past leak that was never fully dried
  • Peeling paint or bubbling on a bathroom ceiling
  • Condensation on windows and cold exterior walls
  • A home inspection or test that found mold

How mold remediation works

The goal is to physically remove mold growth and return the area to normal conditions, not to spray it and paint over it. Here is how we do that.

  • Containment. We seal the work area with plastic sheeting and run air scrubbers with HEPA filters that keep the space under negative pressure, so air flows into the work area instead of out to the rest of the building.
  • Protection. The crew wears respirators and protective clothing, and we shut down heating and cooling to the area so ducts do not carry spores.
  • Removal. Porous materials with growth, like drywall, insulation, carpet and ceiling tiles, are cut out, bagged inside the containment and removed.
  • Cleaning. Framing and other structural wood is HEPA vacuumed, cleaned and, where growth has stained the surface, sanded or wire-brushed.
  • Drying and verification. We dry the area to normal moisture levels, do a final HEPA cleaning, and confirm with readings and inspection. Clearance testing by an independent assessor is available on request.

Why mold comes back, and how we stop it

Every recurring mold problem we are called to has a moisture source that was not fixed. In Bay Area homes the usual ones are predictable. Plumbing leaks inside walls and under sinks drip slowly for months. Bathrooms with weak exhaust fans, or fans ducted into the attic instead of outdoors, keep ceilings damp. Crawl spaces over bare soil send moisture up into the floor framing. Older homes in fog-belt neighborhoods, like the Sunset and Richmond districts of San Francisco and coastal Marin, get condensation on cold exterior walls and windows. Winter storms find gaps in roofs, windows and siding.

Because MM Bay is also a builder, the fix is part of the job. We repair the leak, replace or reroute the bathroom fan, install a crawl space vapor barrier, regrade soil or extend downspouts, and seal the openings storms are getting through. For crawl spaces and lower levels, our waterproofing and moisture control work keeps the conditions that grew the mold from returning.

Does insurance cover mold removal?

Insurance generally covers mold when it results from a covered water loss, such as a pipe that burst or a water heater that failed, and it is reported promptly. Mold from long-term humidity, condensation, poor ventilation or a leak that went on for months is usually excluded as gradual damage or a maintenance issue. Many policies also cap how much they will pay for mold, even when the cause is covered, so it is worth reading the mold section of your policy or asking your agent about the limit.

What decides most mold claims is the cause. We document the moisture source with photos and readings, measure the affected area, and write a remediation scope your adjuster can review line by line. If the mold followed a covered loss, the removal, the related rebuild and any testing needed for clearance may all fall under the same claim. We can bill your insurance company directly for covered work.

Why one company matters

Most water companies leave when the floor is dry. We stay and build it back.

A water loss usually needs two trades: mitigation (stop it, dry it) and construction (rebuild it). Having one licensed builder do both changes how fast and how well your home comes back.

The usual way

Two to four companies, and you in the middle

  1. Water company extracts and driesCompany 1
  2. Walls stay open while you find a contractor
  3. You collect bids and send them to insuranceYou
  4. Contractor rebuilds what someone else tore outCompany 2
  5. Flooring and painting get scheduled separately
  6. Finish trades come and goCompany 3–4

With MM Bay

One licensed builder, one phone number, start to finish

  1. We stop the water and dry the structureMM Bay
  2. We document everything for your claimMM Bay
  3. We work with your adjuster on the scopeMM Bay
  4. The same team rebuilds, permits includedMM Bay
  5. Floors, cabinets, paint, final walkthroughMM Bay

We only cut out what has to go, because we’re the ones putting it back.

How it works

From the first call to the final coat of paint

  1. You call, we answer

    Day or night, a real conversation about what happened, what to shut off and when we’ll be there.

    Minute one
  2. We stop the damage

    Find and stop the source, extract standing water, protect floors and belongings, make the space safe.

    First visit
  3. We dry and document

    Air movers, dehumidifiers and daily moisture readings until every material is verified dry. Photos and logs for your claim.

    Usually 3–5 days
  4. We work with insurance

    We write the repair scope, send it to your adjuster, answer their questions and can bill your insurance directly.

    During drying
  5. We rebuild

    Drywall, insulation, flooring, cabinets, paint and trim, with permits pulled under our license when the job needs them.

    Scheduled with you
  6. Final walkthrough

    We walk the finished space with you and fix anything that isn’t right before we call it done.

    Done
FAQ

Mold: common questions

Still have a question? Call (415) 878-3410. We pick up 24/7.

How much mold can I clean myself?

EPA guidance says a homeowner can often clean a small area, under about 10 square feet or roughly a 3 by 3 foot patch, on hard surfaces. Larger areas, mold inside walls or ductwork, growth after sewage or contaminated water, and anyone with health concerns are reasons to bring in a professional. In every case the moisture source has to be fixed or the growth returns.

Is black mold more dangerous than other mold?

Color does not tell you the species, and many common molds look black or dark green. Industry standards treat all indoor mold growth the same way: remove it under appropriate containment and correct the moisture. If you have health concerns, a doctor is the right person to ask. Our job is removing the growth and fixing why it grew.

Can you just paint over mold?

Painting over mold hides it for a while but does not remove it. The growth continues under the paint as long as the material stays damp, and it often shows through again. Moldy drywall and other porous materials are cut out and replaced. Solid wood framing can be cleaned and sanded. Sealers are only applied after the growth is physically removed and the area is dry.

Do I need to leave my home during mold remediation?

Usually not. Containment with plastic walls and negative air pressure keeps the work area separate from the rest of the house, so most families stay home. Leaving can make sense when the containment blocks a kitchen or the only bathroom, when the affected area is large, or when someone in the home has a health condition their doctor is concerned about.

How do I know the mold is gone?

At the end of the job we inspect the area, confirm moisture readings are back to normal, and do a final HEPA cleaning before the containment comes down. Many homeowners, buyers and insurers also want independent clearance testing, where an assessor who did not do the removal takes air or surface samples for a lab. We coordinate that and keep containment up until the results are back.

Alameda CountyContra Costa CountySan FranciscoSolano CountySonoma CountyMarin CountySanta Cruz CountySan Mateo CountySanta Clara CountyYolo CountyNapa CountySacramento CountyPacific OceanSan Pablo BaySF BaySan RafaelNovatoMill ValleySausalitoCorte MaderaLarkspurSan AnselmoTiburonPetalumaSanta RosaOaklandBerkeleySan MateoPalo AltoSan JoseSan Francisco
Where we work

Mold Remediation across the Bay Area

Based in San Rafael with crews dispatched 24/7 across Marin, Sonoma, San Francisco, the East Bay and the Peninsula.

Sonoma County

East Bay

Peninsula & South Bay

San Francisco

  • Mission
  • Noe Valley
  • Inner Sunset
  • Outer Sunset
  • Richmond
  • Pacific Heights
  • Marina
  • Bernal Heights

Water where it shouldn’t be? We’re ready now.

Call any time, day or night. We’ll tell you what to do right away and send a crew.

(415) 878-3410Request service