You are usually choosing in a hurry, with water on the floor. This checklist takes about ten minutes and covers the things that matter most once the emergency is over. It is general consumer information, not legal advice.
How do I check a contractor's license in California?
Go to cslb.ca.gov, the Contractors State License Board, and use "Check a License." You can search by license number, business name or person. The record shows:
- Whether the license is active, and when it expires.
- The classifications it holds.
- The contractor's bond on file.
- Workers' compensation status.
- Any public disciplinary actions or legal actions.
Make sure the business name on the license matches the name on the estimate and the contract. You can also call CSLB at 1-800-321-2752. If a company cannot give you a license number, or the number belongs to someone else, keep looking.
Does a water damage company need a contractor license?
The rebuild does. In California, any job of $1,000 or more in labor and materials, or any job that needs a building permit, must be done by a CSLB licensed contractor, and a large job cannot be split into smaller pieces to stay under that line. Tearing out and replacing drywall, flooring and cabinets after a leak is construction work. A company that focuses only on drying may not hold a contractor license, so ask who will do the repairs.
What do California contractor license classes mean?
- B, General Building: for work on structures that involves at least two unrelated building trades (framing and carpentry do not count toward the two). It covers a full rebuild of a home or building, including framing and structural repairs.
- B-2, Residential Remodeling: for improvements to existing homes using at least three unrelated trades, but it may not make structural changes to load-bearing parts.
- C classes, specialty contractors: one trade each, such as C-10 electrical, C-36 plumbing, C-39 roofing or C-33 painting.
- A, General Engineering: fixed works like roads, pipelines and grading, not usually home repairs.
For water damage that reaches framing, subfloor or multiple rooms, a B license fits the whole scope.
Who will do the rebuild?
Ask this on the first call. Some companies dry the house and leave the repairs to you. Others hand you to a contractor they work with. Others, like ours, do both. Any of these can work if you know which one you are getting. If the rebuild will be a different company, ask for the complete drying file before the crew leaves. Our guide to mitigation vs. restoration vs. reconstruction explains why that handoff matters.
What documentation should the company give me?
- Photos of the damage and the source before work starts, and as it progresses.
- A moisture map and daily readings, with the dry standard they are measuring against.
- A list of the materials removed and the reason for each.
- Final readings showing the structure is dry before anything is closed up.
- An itemized invoice and repair estimate in a format your adjuster can review.
Ask for copies for your own records. They belong in your claim file.
Can the company bill my insurance directly?
Many restoration companies can, with your written authorization. That usually means you sign a form that lets the insurer pay the company for covered work. Read it before you sign. A fair authorization covers this loss and this address, and lets you keep control of your claim. You still owe your deductible and anything the policy does not cover, such as upgrades you choose.
California also lets you choose who repairs your home. Under the state's Fair Claims Settlement Practices Regulations, an insurer may not require you to use a specific company. You can take a recommendation, or pick your own licensed contractor.
What should a written scope and contract include?
CSLB says that home improvement work over $500 in combined labor and materials must be in a written contract. Look for:
- The contractor's name, address and license number.
- A clear description of the work and materials, room by room.
- The price, a payment schedule tied to work completed, and the down payment.
- Start and completion dates or milestones.
- How changes are approved, in writing, before extra work is done.
- Your cancellation rights, if they apply.
How much can a contractor ask for up front in California?
For home improvement contracts, the down payment may not exceed $1,000 or 10 percent of the contract price, whichever is less. That is Business and Professions Code section 7159, and CSLB requires the statement to appear in the contract in bold type. After the down payment, each progress payment may not be more than the value of the work done and materials delivered. On a $6,000 job, the most a contractor can take up front is $600. On a $50,000 job, it is $1,000. These rules apply to home improvement work on residential property.
Do I have a right to cancel?
If you sign a home improvement contract somewhere other than the contractor's place of business, such as your home, California generally gives you three business days to cancel in writing. Buyers 65 and older get five business days, and some contracts to repair a home damaged by a disaster allow seven. CSLB notes a main exception: a service and repair contract under $750 for emergency repairs you requested on short notice.
For larger emergency work you asked for, the law lets you waive the right to cancel, but only through a separate statement, dated and signed by you, that describes the emergency. Do not sign one for work that is not urgent.
What are the red flags?
- No license number, an expired license, or a license in a different name.
- Pressure to sign an assignment of benefits or direction to pay on the spot, before you have read it.
- A demand for a large payment up front, or cash only.
- Promises to "handle your claim" or get you a bigger settlement. In California, representing you in a claim takes a public adjuster license from the Department of Insurance, unless the person is your attorney.
- No written scope, or a scope that says only "water damage repair."
- Pushing to start permanent repairs before your adjuster has seen the damage.
How MM Bay fits this checklist
MM Bay Construction & Restoration holds California license #1071905, Class B General Building, with a contractor's bond on file. Anyone can look it up at cslb.ca.gov. We answer 24/7, do the emergency drying and the rebuild with one team, give you photos and moisture records, and can bill your insurance directly for covered work. Ask us anything on this page. See how our process works, read about insurance claims, or contact us.
Frequently asked questions
Should I just use the company my insurance company recommends?
You can, and many insurer referrals do good work. You are not required to. California regulations bar insurers from requiring you to use a specific repair company, so you can compare a referral with a licensed contractor you choose. Check the license at cslb.ca.gov either way and ask who will do the rebuild.
Is it normal to sign paperwork before the crew starts?
A short authorization to begin emergency work is normal, and so is a form letting the company bill your insurer. Take a minute to read each one. It should name your address and this loss, describe the emergency work, and not commit you to the full rebuild before you see a written scope.
How do I check a contractor for complaints?
Search the license on cslb.ca.gov. The license record shows any public disciplinary or legal actions CSLB has taken. Also confirm the license is active and the name matches the company you are hiring. Online reviews can add context, but the CSLB record is the official one.
Written by the MM Bay Construction & Restoration team, a California licensed general building contractor (CSLB #1071905) based in San Rafael. This guide is general information, not legal or insurance advice; your policy and your adjuster have the final word.